Airsoft rifle SA-J02 EDGE 2.0™ Aster V3 - black
EDGE™ is a line of replicas by Specna Arms that combines an array of solutions and technologies hard to find in other replicas on the market. It is a series that puts stress on very good craftsmanship of the exterior, solutions that improve upon the versatility of the replica, prolong its lifetime, simplify the diagnostics of a malfunction as well as facilitate the possibility of a power tuning. Straight out of the box you get a replica that does not require any modification, however, if needed - they will be extremely simple.
Specna Arms J-Series™ carbine replicas are made mainly of steel. Steel elements include the receiver, dust cover, external barrel, trigger guard, magazine latch, fire mode selector plate, gas pipe, muzzle device, rear sight, cleaning rod as well as pins and rivets. Remaining metal elements were made of a Zinc and aluminum alloy with a special coating used for their finish gives the replica a very realistic appearance. Similarly to the live firearm original, the stock, pistol grip, magazine, handguard and the gas pipe shroud were all made of polymer.
Replica Features
- receiver made of a steel sheet
- steel, one-piece external barrel
- metal Hop-Up chamber
- precision, internal barrel with a diameter of 6.03 mm
- quick spring exchange system ESA2™
- the set includes additional M90 main spring
- muzzle device mounted on 24 mm CW / 14 mm CCW thread
- “dovetail joint” side mounting rail
- realistic construction in VFC system based on pins, levers and pegs
- plenty of room for a Stick battery under the dust cover (LiPo ready)
- magwell spacer insert to faster magazine reload
- pre-installed GATE ASTER™ V3 system
- originally designed mid-cap S-MAG magazines
The implemented in J-Series™ carbine replicas quick spring exchange system ESA2™ enables a rapid and quick adjustment of the power of the replica to the conditions expected on the playing field without the need for access to a workshop or a set of special tools. Once the gearbox has been taken out of the replica’s body, the process of spring change lasts literally mere seconds - all that is required is to take out the guide along with the spring through the opening in the gearbox frame.
Replicas are compatible with majority of magazines by Cyma, JG, E&L, Bolt, using other brands magazines may require some modifications. The set includes two original, polymer S-MAG mid-cap magazines for 130 BB"s each.
J-Series™ airsoft replicas are powered by Gearbox ORION™ V3 that is characteristic for its high reliability at stock. The mechanism is build to facilitate further tuning and is compatible with M140 springs. Inside, there are elements such as:
- reinforced polymer piston with a full, steel jaw
- aluminum, double air-sealed cylinder head
- aluminum, double air-sealed piston head with bearings
- spring guide with ball bearings
- set of steel gears
The set does not include a battery or a charger.
The set includes
- a replica
- 2x S-MAG mid-cap magazines
- additional M90 main spring
- user’s manual
- Deans adapter - small Tamyia
- GATE ASTER diagnostic card
Specna Arms
is a reliable and well-recognized brand on the airsoft market. Specna Arms offer includes a wide range of replicas divided into two lines: polymer Core and innovative Edge. Thanks to that, the offer will satisfy beginners as well as experienced airsoft players. The replicas are equipped with Easy Spring Access – ESA, Gate electronics, reinforced gearboxes, including Orion Gearbox, precision barrels, unique magazines, and many other exceptional elements. Specna Arms has also acquired the licence from the American firearm manufacturer – Rock River Arms®.
Shooting mode |
Semi and full auto |
Operation |
Electric (AEG) |
BB energy |
1,3 J |
Velocity |
115 m/s (377 FPS) |
Theoretical range |
52 m |
Appropriate BBs weight |
Length |
960 mm |
Weight |
~3545 g |
Forearm |
Real wood |
Body |
Steel |
Stock |
Real wood |
Silencer thread |
M14x1 CCW outer |
"F" mark in the pentagon |
No |
Inner barrel |
~460 mm x 6,03 mm |
Hop-up |
Metal, adjustable |
Gearbox |
V3, Metal alloy |
Bearings |
7 mm metal |
Gears |
Metal alloy, 18:1 |
Piston |
Nylon with a full metal teeth |
Piston head |
Aluminium |
Nozzle |
Plastic |
Motor |
Hi-torque motor, short axle |
Electronics |
Processor unit |
Magazine capacity |
130 |
Magazine material |
Plastic |
Type of the magazine |
Low capacity spring |
11,1 V Li-Po ready |
Yes |
Suitable battery |
Mini Stick (buy here) |
Connector |
T-Dean |
Battery location |
Under bolt cover |
Magazine |
Yes |
Charger |
No |
Battery |
No |
Other accessories |
2nd magazine, MiniTamiya adapter, M90 spring |