Airsoft rifle CMF-16, Sportline, black
There is a wide range of the M4 AEG´s on the market. Cheaper or more expensive, plastic or metal, black or TAN..etc. This assault rifle by a well-known producer G&G from Taiwan is of the Combat Machine series, which is cheaper then for example the GC or Advanced series, but it does not mean it is a cheap weapon in terms of quality. The receiver is made of durable polymer, parts are aligned very precisely and there are no wobbles. This material is also durable, so the receiver can also be appreciated by those who prefers metal only. Some parts are still made of metal, for example the barrel, sights, magazine, bolt cover... However, a lot of features known from the GC series are present, for example the ambidextrous charging handle or magazine release. There is also a Combat Machine engraving on the magwell.
The internals are also well-done. The gearbox shell is reinforced, there are 8mm ball bearings and steel gears inside, and because of fine sealing and an M120 spring inside, the velocity is up to 125mps (410 FPS). Trigger contacts have been replaced by electronic micro-switches, and electronic circuit is hidden in the stock tube. It is called as E.T.U. (Electronic trigger unit).
Advantages:
• Ultra-fast trigger response!
• More sensitive trigger with a shorter stroke.
• MOSFET - protect trigger contacts against burning and worn.
• Ability to set BURST instead of full auto mode. It means three shots per one
trigger press. (Set by holding the shutter mode dose for more than 10 seconds
after disconnecting the battery goes off)
The gun is fitted with a M-Lok handguard, with RIS additional rails. System is very flexible and it is up to the user how much, how long and where the rail is fitted.The advantage of this system is its low weight. Barrel, which passes through the foregrip, firmly bolted and there is no absolutely wooble.
The battery is inserted into the Crane stock. The gun has a standard Mini Tamiya connector.
Magazine is made of polymer and it's a high cap - 450 BBs.
- This model also offers:
The suitable ammunition is 0,25g BB - we recommend to use quality BBs, for example G&G or BLS. Recommended battery is 11,1V!
ATTENTION
Once you set up the hop-up alway set the hop-up to minimal - the adjustment knob is turned to the left.
Shoot several BBs, gently pull the adjustment knob to the right.
Repeat the process until you reach the desired hop-up effect.
Too much hop-up (knob turned right) can cause the BB jam and, in the extreme case, piston damage.
THERE IS NO WARRANTY FOR THIS TYPE OF DAMAGE.
G&G ARMAMENT
is a taiwan manufacturer with a long tradition. It offers high quality processing, advanced electronics, very good performance thanks to high-quality internal parts and reliability. The brand is intensely building a relationship with the airsoft community and is particularly popular abroad.
Shooting mode |
Semi and full auto |
Operation |
Electric (AEG) |
BB energy |
1,6 J |
Velocity |
125 m/s (410 FPS) |
Theoretical range |
56 m |
Appropriate BBs weight |
Length |
710 / 800 mm |
Weight |
~2520 g |
Forearm |
Plastic |
Body |
Polymer with metal parts |
Stock |
Plastic, retractable |
Silencer thread |
M14x1 CCW outer |
"F" mark in the pentagon |
No |
Inner barrel |
~260 mm x 6,08 mm |
Hop-up |
Plastic, adjustable |
Gearbox |
V2, Metal alloy |
Bearings |
8 mm metal |
Gears |
Steel, 18:1 |
Piston |
Nylon with 1 metal tooth |
Piston head |
Plastic |
Motor |
Standard torque motor, long axle |
Magazine capacity |
450 |
Magazine material |
Metal |
Type of the magazine |
High capacity winding |
11,1 V Li-Po ready |
No |
Suitable battery |
Mini CQB (buy here) |
Connector |
Mini Tamiya |
Battery location |
In stock |
Magazine |
Yes |
Charger |
No |
Battery |
No |
Other accessories |
cleaning rod |