Airsoft rifle CM16 Raider 2.0, Sportline, Desert TAN
There is a wide range of the M4 AEGs on the maket. Cheaper or more expensive, plastic or metal, black or TAN..etc. This assault rifle by a well-known producer G&G from Taiwan is of the Combat Machine series, which is cheaper then for example the GC or Advanced series, but it does not mean it is a cheap weapon in terms of quality. The receiver is made of durable polymer, parts are aligned very precisely and there are no wobbles. This material is also durable, so the receiver can also be appreciated by those who prefers metal only. Some parts are still made of metal, for example the barrel, sights, magazine, bolt cover... However, a lot of features known from the GC series are present, for example the ambidextrous charging handle or magazine release. There is also a Combat Machine engraving on the magwell.
The internals are also well-done. Although there is not a electronic trigger unit, but standard components, the rate of fire will not offend you. The gearbox shell is reinforced, there are 8mm ball bearings and steel gears inside, and because of fine sealing and an M120 spring inside, the velocity is up to 125 mps (410 FPS). Furthermore, you can find the rotary hop-up chamber inside the weapon, which is a bit unexpected, because you may know it from the most expensive models.
The gun is fitted with M-Lok handguard, which is very popular and advanced system when using locks easily and quickly attach the mounting RIS rails. The system is very flexible and it is up to the user how much, how long and where the rail is fitted. These rails needs to be purchased separately according to user needs. The advantage of this system is its low weight. Barrel, which passes through the foregrip, firmly bolted and there is no absolutely wooble.
The battery is inserted into the body of the plastic sliding butt Crane LMT. The gun has a standard Mini Tamiya connector. The stock is obviously retractable, six-position, with the locking mechanism.
Magazine is made of metal it's a high cap - 450 BBs. It's the lenghtened type with a nice realistic surface and the 5.56x45mm marking.
The suitable ammunition is 0,25g BB - we recommend to use quality BBs, for example G&G or BLS. The appropriate battery is 9.6V NiMH or 7.4V Li-Po.
ATTENTION
Once you set up the hop-up alway set the hop-up to minimal - the adjustment knob is turned to the left.
Shoot several BBs, gently pull the adjustment knob to the right.
Repeat the process until you reach the desired hop-up effect.
Too much hop-up (knob turned right) can cause the BB jam and, in the extreme case, piston damage.
THERE IS NO WARRANTY FOR THIS TYPE OF DAMAGE.
G&G ARMAMENT
is a taiwan manufacturer with a long tradition. It offers high quality processing, advanced electronics, very good performance thanks to high-quality internal parts and reliability. The brand is intensely building a relationship with the airsoft community and is particularly popular abroad.
Shooting mode |
Semi and full auto |
Operation |
Electric (AEG) |
BB energy |
1,6 J |
Velocity |
125 m/s (410 FPS) |
Theoretical range |
56 m |
Appropriate BBs weight |
Length |
710 / 800 mm |
Weight |
~2100 g |
Forearm |
Plastic |
Body |
Polymer with metal parts |
Stock |
Plastic, retractable |
Silencer thread |
M14x1 CCW outer |
"F" mark in the pentagon |
No |
Inner barrel |
~270 mm x 6,08 mm |
Hop-up |
Plastic, adjustable |
Gearbox |
V2, Metal alloy |
Bearings |
8 mm metal |
Gears |
Steel, 18:1 |
Piston |
Nylon with 1 metal tooth |
Piston head |
Plastic |
Motor |
Standard torque motor, long axle |
Magazine capacity |
450 |
Magazine material |
Metal |
Type of the magazine |
High capacity winding |
11,1 V Li-Po ready |
No |
Suitable battery |
Mini CQB (buy here) |
Connector |
Mini Tamiya |
Battery location |
In stock |
Magazine |
Yes |
Charger |
No |
Battery |
No |
Other accessories |
cleaning rod |