Spitfire tracer with flame mode

The tracer Imperator Tactical Spitfire with flame mode.

The tracer unit is designed for green tracer BBs. With each shot the unit uses sensors to detect a passing BB and flashes the diod briefly (2x 3 pcs 5 W UV LEDs on both sides). This illuminates BB and causes a fantastic effect during flight at night. It is visible along the entire flight path and imitates tracer ammunition.

The Spitfire tracer also has 3 LEDs on the front of the silencer that illuminate the gas escaping from the barrel when fired and imitates the flash of the shot.

The tracer unit is housed in a matt anodised aluminium housing and is waterproof. It is powered by a replaceable 3.7 V 300 mAh Li-Ion battery. The silencer has an M14- thread. Thanks to the standard thread, it can be used on the vast majority of airsoft guns with unscrewable compensator. Included in the package is an adapter for 11 mm pistol threads, so you can use the silencer on any weapon.

The silencer is operated by a single button located on the rear face of the silencer. One press to turn on/off. A longer hold of the button will turn on/off the flame mode.

It has intelligent power management - it automatically goes to sleep mode when not in use for more than 1 minute. Upon movement, detection of a passing BB (after 3 BBs), or when the button is pressed, it automatically "wakes up". Unscrew the body to access the power connector (Micro-USB power cable included).

SPECIFICATIONS

• Li-Ion battery 3.7 V 300 mAh
• Lights up to 2,000 BBs per charge (up to 4 hours of use)
• Flame mode
• Low battery voltage warning
• Battery status indicator with LED (green/red)
• Waterproof design
• Unit is fully functional up to ROF of 35 RPS (rounds per second)
• 9 pcs of high-power 5 W UV LEDs
• Designed for green tracer BBs
• CCW M14 thread and CW M11 adapter is included
• Operating temperature range: -10°C to 42°C
• Silencer dimensions: diameter 34 mm, length 82 mm
• Weight: 74 g

WARNING

• Do not disassemble the unit - risk of electric shock (high voltage).
• If the unit does not work even though the LED indicates switching on, check the cleanliness of the inner tube and clean if necessary. Charge the battery.
• If the unit cannot be switched on (no LED indication of switching on, even after plugging in the USB cable), the battery may be undercharged. Plug in the power cord while pressing the power button. Keep the button pressed until it starts flashing green. Then release the button, remove the power cord, reconnect the power cord and charge the unit.
• Charge the unit regularly.
• Frequent undercharging will damage the battery and may cause permanent malfunction, which is not covered under warranty.
• When not in use, charge the silencer at least once every 2 months to prevent undercharging.
• The LED will flash red when charging. Once it starts flashing green, the battery is 90% charged. Then let the unit charge for 5-10 minutes more and then disconnect the power. NEVER CHARGE FOR LONGER - THERE IS A RISK OF DAMAGE TO THE BATTERY (FIRE, EXPLOSION)..

PACKAGING CONTENT

• Flash tracer silencer
• Micro-USB cable
• M11 CW adapter