Hanger pouch type 2 (for chest rig of other manufacturers) - vz.95

The hanger pouch is an additional pocket to the armour plate carriers, which are equipped with a Velcro panel on the front side.

It is a universal pouch with dimensions of 14 x 18 x 6 cm. The pouch is fastened with Velcro at the top of the pocket. On the front side, there is a Velcro panel measuring 4 x 18 cm for placement of a patch.

The pouch is equipped with a Velcro "grip" on the top part (one side with a loop and the other with a hook), with which the pouch is attached to the armour plate carrier (see photo).

Attention

This pouch is produced in 2 versions, and differs in the location of the Velcro on the upper fastener for attaching the pouch to the plate carrier:

• Type 1 has a hook and loop part of the Velcro on the front and a soft loop part on the back. This version is suitable for As-Tex plate carriers.
• Type 2 has a soft loop Velcro section at the front and a hook and loop section at the back. This version is suitable for e.g. the Demon plate carrier and others.

Before buying, check which type of pouch is suitable for your plate carrier.

VZ.95

Camouflage pattern used by the Czech Army. It contains irregular black, dark brown, olive green and light green fields. It differs from the american Woodland pattern by using a smaller amount of dark color. It's developed especially for conditions and environment of the Czech Republic. Another variant of the vz.95 is the Desert designed for desert environments. The material is from the same manufacturer, and has similar specifications, as the ULENA material used for the production of the Czech Army equipment.

RIPSTOP

Material developed in the USA during the Second World War. It is manufactured using a special technique and is characterized by a very good weight-to-stability ratio and high tear strength. At regular intervals, thicker fibers are woven transversely and longitudinally into the material. This prevents defects from spreading when mechanically ruptured. The material is from the same manufacturer, and has similar specifications, as the ULENA material used for the production of the Czech Army equipment.