Propylene Bernzomatic MAP-Pro® (400g)

Bernzomatic MAP-Pro^® gas (propylene) is a high-performance gas intended primarily for torches and soldering equipment. It is used in airsoft by some experienced "tuners" for its higher pressure. However, it is necessary to have a sufficiently modified weapon that will be able to handle this high pressure, know the safety rules for use and lubricate the weapon sufficiently (the gas does not contain lubricant). Do not use for regular (non-upgraded) gas weapons - damage will occur that is not covered by the warranty.

Non-returnable, non-refillable cartridge. An adapter is required for refilling (not included).

For gas guns, the Green gas is intended, or Blue Gas for guns with a plastic slide.

SPECIFICATIONS

• Pressure at 20°C: 1.57 Mpa / 228 Psi / 16 Bar
• Gas weight: 400 g
• Composition: propylene
• Valve: CGA 600 with external US thread 1"-UNEF 20T/P
• Cylinder dimensions: 27 x 7.5 cm

WARNING

Bernzomatic MAP/Pro gas is not intended for airsoft guns. Use in airsoft is at your own risk only for experienced players with a quality and upgraded gun, which is modified to high gas pressure and know the limits of their weapon + safety rules for working with this gas. The gas does not contain lubricant and the weapon and seals must be thoroughly lubricated. Improper use may damage the weapon or magazine. Not intended for Japanese weapons (Tokyo Marui, KSC, Maruzen, Marushin, Tanaka, etc.). Due to the different expansion characteristics, the plastic slide will be damaged! Blue Gas is intended for these weapons.

SAFETY WARNING

• Gas cylinders cannot be refilled, after use they belong to hazardous waste.
• The gas is under pressure.
• Do not expose to heat and direct sunlight!
• The gas is extremely flammable!
• Do not expose to temperatures higher than 49 °C.
• Use only outdoors or in well-ventilated areas, do not inhale the gas!