Airsoft rifle TR16 MBR 556WH - Advanced, G2 Technology, Full metal, Electronic trigger
We present the best gun ever produced by the G&G - the TR16 MBR 556WH with the new G2 mechabox.
What can this gun offer to you?
The replica belongs to the highest category of G&G Advanced. It has a high quality all-metal chassis that delivers robustness and durability. Thanks to the Crane LMT plastic collapsible stock, you adjust the length exactly for you - it can be set in six positions. Here also, when the button is pressed and the rubber foot is tilted to the side, is space for the battery. For reliable operation of the replica, the manufacturer recommends a rechargeable battery of at least 9.6V NiMH, ideally 11.1V Li-Po (type MiniCQB). The replica has a classic Mini-Tamyia connector. Additionally, there is a storage compartment in the stock support, where you can insert, for example, replacement batteries into the flashlight.
The metal upper and metal bottom parts of the VLTOR style body are top-stitched. There are no burrs or traces of casting. The grip and the magazine are an ergonomically shaped rubber grip for better grip. You can find other nice enhancements on the body of the gun - the two-sided fire selector and magazine release. By pulling the charging handle, which is lightweight with a latch and looks really luxurious, you open the dust cap of the bolt. Here is a default access for hop-up settings. The improvement is that you do not have to hold the charging handle for the hop-up setting yet - the metal-immitting bolt remains locked in the open position and the hop-up space is so loose. The bolt release is on the left.
On the upper part of the weapon is a standard RIS with folding sights for installation of optics / red dot and other equipment. The bottom part of the body is laser-labeled with the manufacturer's logo and a unique serial number.
The power of the weapon is about 125m/s (410 FPS). Suitable ammunition is 0,25g BBs.
Overall, external processing and materials are at a very high level. But the performance of the G&G TR 16 does not stop. On the contrary, that important is hidden inside ...
G2 System - the mechabox of the future
Inside the gun is a completely new and improved metal gearbox G2 with 8mm ball bearings, steel gears and M120 spring. Additionally equipped with electronics - a mosfet located in the stock tube and G2 ETU (Electronic trigger unit) in the gearbox. Internal trigger contacts with electronic microswitches.
- 70% reinforcement of the gearbox frame in the most stressed parts *
- Quick change spring
- Double seals on cylinder head and nozzle for higher performance
- Double-sided fire selector and release of the magazine for faster operation
- Disconnecting the motor in the case of removed or empty magazine
- Improved oblique gears for higher performance, lower heating and power consumption.
- MOSFET reduced by 50% * for greater space in the stock tube
- Improved ETU (Electronic trigger unit) for a more sensitive trigger and to prevent triggering of the trigger
- BURST mode option - 3 or 5 shots
- Acoustic signaling of low battery voltage and gearbox faults
* compared to the previous version
Once you set up the hop-up alway set the hop-up to minimal - the adjustment knob is turned to the left. Shoot several BBs, gently pull the adjustment knob to the right. Repeat the process until you reach the desired hop-up effect. Too much hop-up (knob turned right) can cause the BB jam and, in the extreme case, piston damage.
THERE IS NO WARRANTY FOR THIS TYPE OF DAMAGE.
is a taiwan manufacturer with a long tradition. It offers high quality processing, advanced electronics, very good performance thanks to high-quality internal parts and reliability. The brand is intensely building a relationship with the airsoft community and is particularly popular abroad.
Semi and full auto
|BB energy (J)||
|Theoretical range (m)||
|Appropriate balls weight|
Plastic (or fiber), retractable
Metal, RIS mount
|Inner barrel length||
nylon with 1 metal tooth
Plastic adjustable Hop-Up
|Type of the magazine||
Low capacity spring