GC16 MPW 12" Keymod, Full metal, Electronic trigger
There is a wide range of the M4 AEGs on the maket. Cheaper or more expensive, plastic or metal, black or TAN..etc. GC16 rifle is one of the best rifles you can get in this segment. G&G Armament (Taiwan) is a manufacturer with a long tradition. It offers high quality workmanship, performance and reliability.
The most interesting is inside. Trigger contacts have been replaced by electronic micro-switches, and electronic circuit is hidden in the stock tube. It is called as E.T.U. (Electronic trigger unit).
• Ultra-fast trigger response!
• More sensitive trigger with a shorter stroke.
• MOSFET - protect trigger contacts against burning and worn.
• Ability to set BURST instead of full auto mode. It means three shots per one trigger press. (Set by holding the shutter mode dose for more than 10 seconds after disconnecting the battery goes off)
Metal upper and lower receiver perfectly fit. There appear to be no burrs or traces of casting. The bottom part of the body is laser marked with the manufacturer's logo and a unique serial number.
The gun is fitted with KeyMod foregrip, which is very popular and advanced system when using locks easily and quickly attach the mounting RIS rails. The system is very flexible and it is up to the user how much, how long and where the rail is fitted. These rails needs to be purchased separately according to user needs. The advantage of this system is its low weight. Barrel, which passes through the foregrip, firmly bolted and there is no absolutely wooble.
The battery is inserted into the body of the plastic sliding butt Crane LMT. The gun has a classic MiniTamyia connector. The stock is obviously sliding, six-position, with the locking mechanism.
Magazine is metal, high cap - 450 BBs.
Inside the gun is metal gearbox with an 8mm ball bearings, steel gears and
M120 spring. Velocity of this gun is about 125 m / s (410 FPS). Suitable
ammunition is 0,25g BB. Use battery min 9,6V NiMH or 11,1V !
Once you set up the hop-up alway set the hop-up to minimal - the adjustment knob is turned to the left. Shoot several BBs, gently pull the adjustment knob to the right. Repeat the process until you reach the desired hop-up effect. Too much hop-up (knob turned right) can cause the BB jam and, in the extreme case, piston damage.
THERE IS NO WARRANTY FOR THIS TYPE OF DAMAGE.
is a taiwan manufacturer with a long tradition. It offers high quality processing, advanced electronics, very good performance thanks to high-quality internal parts and reliability. The brand is intensely building a relationship with the airsoft community and is particularly popular abroad.
Semi and full auto
|BB energy (J)||
|Theoretical range (m)||
|Appropriate balls weight|
765 / 865
Plastic (or fiber), retractable
Metal, RIS mount
nylon with 1 metal tooth
Plastic adjustable Hop-Up
|Type of the magazine||
High capacity winding
Mini CQB (buy here)