We present the best gun ever produced by the G&G - the TR16 SBR 308 M-LOK with the new G2 mechabox.
What can this gun offer to you?
The replica belongs to the highest category of G&G Advanced. It has a high quality all-metal chassis that delivers robustness and durability. Thanks to the Crane LMT plastic collapsible stock, you adjust the length exactly for you - it can be set in six positions. Here also, when the button is pressed and the rubber foot is tilted to the side, is space for the battery. For reliable operation of the replica, the manufacturer recommends a rechargeable battery of at least 9.6V NiMH, ideally 11.1V Li-Po (type MiniCQB). The replica has a classic Mini-Tamyia connector. Additionally, there is a storage compartment in the stock support, where you can insert, for example, replacement batteries into the flashlight.
The TR16 MBR 308 WH is an interesting example of modernization by G&G. From the first contact it's obvious this is not a common M4. The massive magazine reveals that rifle imitates a 7.62mm weapon. Notice the massive reciever next, it is relative to a SR-25. Also the fire selector is inspired by a SR-25; its final position is where the SR-25 has the "semi" mode. But in the case of the TR 16 .308, the semi mode is in 45 degree angle and auto has replaced the standard position of semi.
This weapon offers a high standard of externals as well as the other G&G replicas. The weapon is full metal of course with well-done surface. The parts of the weapon fit great without any wobbling. The M-LOK handguard is really light, therefore the weapon has the center of gravity more closer to the shooter. Notice the stylish flashider at the end of the handguard.
Attention, this weapon is not compatible with standard M4 magazines. However, the inner parts are similar to the TR16 5.56 ones, so do not worry about the availability of spare parts.
By pulling the charging handle, which is lightweight with a latch and looks really luxurious, you open the dust cap of the bolt. Here is a default access for hop-up settings. The improvement is that you do not have to hold the charging handle for the hop-up setting yet - the metal-immitting bolt remains locked in the open position and the hop-up space is so loose. The bolt release is on the left.
On the upper part of the weapon is a standard RIS with folding sights for installation of optics / red dot and other equipment. The bottom part of the body is laser-labeled with the manufacturer's logo and a unique serial number.
The power of the weapon is about 125m/s (410 FPS). Suitable ammunition is 0,25g BBs.
Overall, external processing and materials are at a very high level. But the performance of the G&G TR 16 does not stop. On the contrary, that important is hidden inside ...
G2 System - the mechabox of the future
Inside the gun is a completely new and improved metal gearbox G2 with 8mm ball bearings, steel gears and M120 spring. Additionally equipped with electronics - a mosfet located in the stock tube and G2 ETU (Electronic trigger unit) in the gearbox. Internal trigger contacts with electronic microswitches.
- 70% reinforcement of the gearbox frame in the most stressed parts *
- Quick change spring
- Double seals on cylinder head and nozzle for higher performance
- Double-sided fire selector and release of the magazine for faster operation
- Disconnecting the motor in the case of removed or empty magazine
- Improved oblique gears for higher performance, lower heating and power consumption.
- MOSFET reduced by 50% * for greater space in the stock tube
- Improved ETU (Electronic trigger unit) for a more sensitive trigger and to prevent triggering of the trigger
- BURST mode option - 3 or 5 shots
- Acoustic signaling of low battery voltage and gearbox faults
* compared to the previous version
est un fabricant de Taiwan avec une longue tradition. Il offre un traitement de haute qualité, une électronique de pointe, de très bonnes performances grâce à des composants internes de haute qualité et une grande fiabilité. La marque construit intensément une relation avec la communauté airsoft et est particulièrement appréciée à l’étranger.
|Mode(s) de tir||
l'action et un et dose
|Vitesse de la bille (m/s)||
|Vitesse de la bille (fps)||
|Portée théorique (m)||
|Boules de poids appropriés|
Aluminium usiné CNC
Plastique (ou fibre), rétractable
Métal, monture M-LOK
|Longueur du canon interne (mm)||
nylon avec 1 dent métallique
|Tête de piston||
Tête en nylon
Hop-Up réglable en plastique
|Type de chargeurs||
Bas capacité ressort
|Emplacement de la batterie||
|Chargeur de batterie||