Airsoft rifle CQB Machine MOD-2, Kestrel ECU, 2 magazines - Half TAN
The M4 Carbine is a 5.56×45mm NATO, air-cooled, gas-operated, direct impingement, magazine-fed, select fire carbine. The M4 is extensively used by the United States Armed Forces and is largely replacing the M16 rifle in United States Army and United States Marine Corps (USMC) combat units as the primary infantry weapon and service rifle. The M4 has semi-automatic and three-round burst firing modes (like the M16A2 and M16A4), while the M4A1 has semi-automatic and fully automatic firing modes (like the M16A1 and M16A3).
The CQB Machine series guns are perfectly balanced, compact and powerful, ideal for CQB games. They use tried and tested parts from the Advanced series and further enhance the quality and capabilities of these airsoft guns.
Right out of the box, the CQB Machine is ready for reliable and trouble-free operation with a muzzle velocity of 125 m/s. The Kestrel processor unit and two mid-cap magazines with quick-loader in the package are also advantages. The guns are compatible with a wide range of PMAG, STANAG and drum magazines of other brands magazines. Due to its design, it also offers a wide range of modification options with other aftermarket parts.
APPEARANCE
The rifle is full-metal - complete receiver, sights, stock tube, outer barrel, flash hider and forearm. There are 5 slots on the M-LOK forearm at the 3, 6 and 9 o'clock positions to accommodate accessories such as flashlight, laser, grip, etc. A RIS rail is integrated on the upper receiver and part of the forearm for installing sights, optics or a red-dot. The strap attachment is solved by a steel eyelet between the receiver and the stock tube.
The pistol grip and the retractable 5-position stock are made of high quality polymer. The stock has a roughened grip for a better and more secure grip, the buttstock is rubber. The receiver and forearm are black anodized for good corrosion protection and abrasion resistance.
The weapon also has a unique flash hider installed.
Pulling the ambidextrous charging lever accesses the rotating ring of the hop-up chamber (ProWin style). The imitation bolt is locked, making hop-up adjustment very comfortable. The bolt catch is functional, and like the real steel gun, is located on the left side of the body. There is also a classic selector lever on this side. The magazine catch is single-sided, on the right side of the body. The type of weapon and the unique serial number are stamped on the trigger guard.
KESTREL ECU
The gun is equipped with a Kestrel V2 Basic programmable processor unit that protects the gearbox and battery from damage (over-discharge or over-voltage/short circuit), allows for 5 levels of pre-cocking adjustment and selector lever behavior (SEMI / Binary / FULL AUTO / 3-shot burst), also has an active brake function and supports the use of powerful brushless or super torque motors.
Settings are simply made using the selector lever and trigger.
UPGRADE PARTS
The following internal upgrade parts are installed in CQB Machine series:
- Kestrel ETU (Electronic Trigger Unit) with microswitch and low-resistance wiring
- Metal nozzle with double sealing
- Metal cylinder head with double sealing
- Polished stainless steel cylinder
- Metal piston head with bearing
- Polymer piston with hardened steel teeth
- Stainless steel QD spring guide with bearing
- Metal QD gearbox (with quick change spring)
- Reinforced 18:1 gear set
- 8 mm bearing
- Rotary Hop-Up chamber ProWin style
- Precision 6.03 mm barrel
- DeanT connector
PERFORMANCE
This CQB Machine Series gun is designed directly from AirsoftPro and manufactured by the E&C factory to deliver stable performance of 125 m/s (1.6 J / 0.20 g) without the need for complex tuning or upgrades. During the tests we measured an average velocity of 128 m/s (1.64 J / 0.20 g).
Suitable BBs are 0,25 - 0,28 g.
QUALITY AND RELIABILITY
E&C guns are generally known for their quality and reliability. The failure rate is less than 1.5% - that's several times lower than average and you get a reliable gun for your money.
Li-Po 11,1 V READY
The gun has a Dean-T connector on the low-resistance cables and is ready to use 11.1V Li-Po batteries. As usual with branded guns, neither the charger nor the battery are included. Compatible batteries, chargers, or spare magazines can be found in the Related products section below.
2 MAGAZINES IN THE PACKAGE
Included are 2 mid-cap magazines for 120 BBc. This further increases the value of the Advanced III series weapons and improves the reliability of the weapon. Spare magazines are recommended to choose the same brand, i.e. E&C, however the gun is also compatible with CYMA, TopArms, etc.
The package also includes a speed-loader for easy filling of mid-cap magazines, vertical grip and AirsoftPro patch.EXCLUSIVE DISTRIBUTOR
AirsoftPro.cz has been the exclusive distributor of the E&C brand for the Czech Republic since 2018. We can guarantee a trouble-free warranty service of the gun.
PACKAGE CONTENTS
- Airsoft rifle CQB Machine
- 2x polymer mid-cap magazine (120 BBs)
- Speed loader
- Vertical grip
- AirsoftPro patch
- User manual
East Crane (HongKong) co., LTD est une société professionnelle de conception d'outils de développement depuis plus de vingt ans. Avec une réputation grandissante et de nombreuses années d'expérience, East Crane a décidé de créer sa propre marque "E&C". La devise de la société est la plus haute qualité possible dans un processus de production efficace et avec le soutien de ses fans. Les produits airsoft E&C sont connus pour leur fiabilité, leur durabilité et leur excellent rapport prix/performance.
Mode(s) de tir |
L'action et un et dose |
Type |
Électrique (AEG) |
Energie |
1,6 J |
Vitesse de la bille |
125 m/s (410 FPS) |
Portée théorique |
56 m |
Boules de poids appropriés |
Taille |
683 / 765 mm |
Poids |
~2640 g |
Garde-Main |
Métal, M-LOK |
Le corps |
Alliage métallique |
Crosse |
Plastique, rétractable |
Fil du silencieux |
M14x1 gauche externe |
Marque "F" dans le pentagone |
Non |
Canon intérieur |
~255 mm x 6,03 mm |
Hop-up |
Plastique, réglable |
Gearbox |
V2, Alliage métallique |
Roulements |
8 mm métal |
Engrenages |
Alliage métallique, 18:1 |
Piston |
Nylon avec des dents en métal |
Tête de piston |
Aluminium |
Nozzle |
Métal |
Moteur |
Moteur standard, axe long |
Électronique |
Unité de traitement |
La capacité du chargeur |
120 |
Matière |
Plastique |
Type de chargeurs |
Bas capacité ressort |
11,1 V Li-Po ready |
Oui |
Batterie conseillée | |
Connecteur |
T-Dean |
Emplacement de la batterie |
Dans un buffer tube |
Chargeur |
Oui |
Chargeur de batterie |
Non |
Batterie |
Non |
Autres accessoires |
2ème chargeur, poignée, chargeur rapide, patch |