G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]

G316CV , EBB , black

Fabriquant: S&T
Référence: 7766
Disponibilité: Pas en stock
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
G316CV , EBB , black [S&T]G316CV , EBB , black [S&T]
Description du produit

The replica, similarly to the original, was made of durable polymer and metal. The replica is equipped with a RIS 22 mm mount on the top, followed by 3 short rails on the handguard. You can place e.g. a grip there, however, one grip is included.

It is characteristic for its very good alignment of parts as well as the fact that it was made of matte polymer. The more important elements were joined with pins. This way specific elements can be changed, for instance the magazine well. The receiver of the replica made of solid polymer features an individual serial number, manufacturer markings and aesthetic fire mode selector symbols. The replica features a stock foldable to the side, which simplifies the transportation and operating in tight corners. The metal barrel features a flash hider mounted on a 14 mm CW thread.

The heart of the replica consists of a Li-Po ready gearbox V3 with an installed micro-connector. The gearbox is fully adjusted for modifications and the implementation of a micro-connector positively influences the trigger reaction speed and rate of fire of the replica.

The replica is fully compatible with LiPo and LiFe batteries. Due to a base muzzle velocity of ~ 390 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range.

The weapon features a quick spring release system. In order to gain the access to the gearbox, all that is necessary is to remove the pin located in the latch blocking the stock. In this way, the access to the main spring guide is gained, which can be quickly and easily pulled out through the backside of the gearbox. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools. The entire spring exchange lasts 45 seconds and requires only a single screwdriver.

The replica, similarly to the original, was adapted for use by both left- and right-handed users thanks to a double-sided fire mode selector plate.

This model uses an interesting solution in the form of EBB (Electric Blow Back) system that sets the bolt carrier into motions, increasing the realism and bringing it closer to the live firearm original.

Additionaly, there is a piston release system. For releasing, push a bolt catch.Do not use it when the spring is fully compressed! Risk of damage. Its purpose is to release only slightly compressed spring.

The set includes a Hi-Cap magazine with a capacity of up to 450 BBs.

The set does not include a battery or a charger.

The set includes:

  • replica
  • magazine
  • another stock
  • grip


a.k.a S&T was founded in 2009 with the headquarter office located in Hong Kong, subsidiary company in Japan. S&T in worldwide famous company manufacturing airgun/airsoft gun. They are a group of airsoft enthusiasts sho understand airsoft as well as manufacturing, sourcing & distributing airsoft products. Their mission is to supply wide range of quality airsoft products with the most competitive pricing for consumers.

Information de base
Mode(s) de tir
l'action et un et dose
Électrique (AEG)
Performance estimée (+/- 10%)
Energie (J)
Vitesse de la bille (m/s)
Vitesse de la bille (fps)
Portée théorique (m)
Boules de poids appropriés
Spécifications externes
Taille (mm)
Poids (g)
Corps en polymère avec petites pièces métalliques
En plastique ou en fibre
Spécifications internes
Longueur du canon interne (mm)
Alliage métallique
8mm métal
alliage métallique
nylon avec 1 dent métallique
Tête de piston
Tête en nylon
Hop-Up réglable en plastique
Type de chargeurs
Haute capacité
Batterie conseillée
Mini Tamiya
Emplacement de la batterie
En avant
Contenu du paquet
Chargeur de batterie
grip, another stock
SKU: 5177
NiMH Battery 9,6V 1600mAh - Mini CQB [TopArms]NiMH Battery 9,6V 1600mAh - Mini CQB [TopArms]

NiMH Battery 9,6V 1600mAh - Mini CQB [TopArms]

495 Kč
en stock
SKU: 5181
Smart NIMH charger MH-8S [TopArms]Smart NIMH charger MH-8S [TopArms]

Smart NIMH charger MH-8S [TopArms]

495 Kč
en stock
SKU: 2096
Smart NIMH charger HN3020 [A.C.M.]Smart NIMH charger HN3020 [A.C.M.]

Smart NIMH charger HN3020 [A.C.M.]

599 Kč
en stock
SKU: 5482
Airsoft BBs BLS Precision Grade 0,25g 4000pcs - white [BLS]Airsoft BBs BLS Precision Grade 0,25g 4000pcs - white [BLS]
SKU: 2624
Airsoft BBs G&G Perfect 0,25g 4000pcs - white [G&G]

Airsoft BBs G&G Perfect 0,25g 4000pcs - white [G&G]

255 Kč
en stock